USB HF 13.56KHz RFID Reader & Writer IC card reader

Product Code: xyt-294


USB HF 13.56KHz RFID Reader & Writer IC card reader

XYTU-IC is a high performance 13.56MHz RFID smart card reader without driver, reader distance up to 80mm, it’s not only simple aspect, but also stable and reliable data. Widely used for RFID Radio Frequency Identification system and project, Such as Automated parking management system, Personal identification, Access controller, Production Access control, etc


Ⅰ. Technical Parameters


Item Parameters
Model XYTU-IC (HF-IC Reader)
Frequency 13.56MHz
Support cards MF(S50/S70/Ntag213 etc.ect. 14443A protocols cards)
Output format 10 digit dec + Enter (Defoult output format)(Allow user to customize the output format)
Size 75mm×21mm×7mm (Withouut package)
Colour White
Interface USB
Power Supply DC 5V
Operating Distance 0mm-100mm(related to the card or the environment)
Service Temperature -10℃ ~ +70℃
Store Temperature -20℃ ~ +80℃
Working humidity <90%
Read time <200ms
Read interval <0.5S
Weight About 10G (Without Package)About 40G (With Package)
Material of reader ABS
Operating System Win XP\Win CE\Win 7\Win 10\LIUNX\Vista\Android
Indicators Double Color LED (Blue &a Green) and Buzzer("Blue" means standby, "Green" means reader success)

Ⅱ. Instructions for use
Method of installation and use

  1. Connect with phone/pad of Android system through Micro-USB interface directly. When the reader into the self-inspection. And the same time, LED turn into Blue means standby.
  2. Open the output software of phone/pad (such as memo or SMS editor),.
  3. The mouse in Message editor or memo clicking.
  4. Put tag on the top of reader, the software will output a data(card number) of the tag. When reading the tag, LED light change from Blue to green.

Detecting device is connected

Open the Device Manager of computer, If appears Humans Input Device that means Reader has successfully into computer.


Ⅲ. Precautions

  1. Do not install the reader on the magnetic objects and metal objects, they will seriously affect the RF signal.
  2. If after reading, the tag is still in the induction zone, the RF reader will not send data and without any hints.

Ⅳ. Common problems

  1. Operation without feedback: Please check whether the interface plugged in, whether the tag is a valid or whether another RF tag is within the reading range.
  2. Data error: Please check Whether the mouse is moved, whether the reader is in a critical state and whether the cable length is too long.

Ⅴ. Picture


There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good