18x18MM FM11RF08 RFID Wet Inlay
18x18MM FM11RF08 RFID Wet Inlay
Basic Feature
The RFID inlay consists of two components. An integrated circuit or microchip that stores personal identifying information attaches to a small coil of aluminum, copper or silver wires called the antenna, which transmits and receives radio frequency signals. The microchip and antenna are then placed on a label, and the entire unit is encased in plastic.
Our Inlay is covered in the surface material to form the final label. These are some materials:
1. Coated Paper: Low cost, easy to print on.
2. PET: Waterproof, heatproof, environmental protection.
3. PVC: Waterproof, corrosion resistance, high-temperature resistance.
4. Normal Double-sided adhesive: Robust, widely used, and cheaper than 3 M Glue.
5. 3 M Glue: Higher cost but strong viscosity, good temperature tolerance & anti-corrosion.
6. Electrostatic adhesive: Electrostatic prevention, high-temperature resistance, strong water resistance
For die-cutting, the minimum size should be 4 mm bigger than inlay normally.
| Parameters | |
| IC | FM11RF08 |
| Memory | 1K bytes |
| Frequency | 13.56MHZ |
| Material | PET |
| Available Material | Soft PVC, Paper |
| Antenna Size | 15X15MM / 0.59X0.59〃 |
| Die-cut Size | 18x18MM / 0.7X0.7〃 |
| Available Die Cut Size | Round Shape:Ø20mm/26mm/ 29mm/30mm/35mm/ 38mm/40mm/50mm Square Shape:/20x20mm/25x25mm/ 30x30mm/35x35mm/ 40x40mm/45x45mm/50x50mm Rectangle Shape:12x20MM/ 15X20MM/15X30MM/ 20X40MM/25X40mm/ 25X38mm/18x56MM/54x86MM |
| NFC Chip Available | MF 1k / 4k,MF ntag213 /213/215/216 , MF Ultralight /-C, MF DESFire 2K/4K/8K,MF Plus-X /S 2K/4K , TI2048,SRT512,FELICA-LITE-S,Topaz512 ,SLE 66R35,SLE 66R01 |
| Operating Temperature | -25°C to 70°C / -13°F to 158°F |
| Craft | Logo Printing |
| Available Craft | Number /QR Code / UID Printing , Data encoding , Anti-Metal Epoxy Surface etc |
| Adhesive | Acrylic, water borne adhesive |
| Adhesive Usage Temperature | min. -20°C to 80°C / min. -4°F to 176°F |
| Qty/Roll | Mini 1000 pcs per Roll |
| Core Size | 76 mm / 3“ |
| Shelf Life: minimum of 2 years from the date of manufacture in | 20°C / 68°F, 50% RH |
| Common Chip Types | Protocol | Capacity | Anti-collision | Function |
| Available 125KHz Chip | ||||
| TK4100 | / | 64 bit | No | Read Only |
| EM4200 | / | 128 bit | No | Read Only |
| EM4305 | / | 512 bit | No | Read/Write |
| T5577 | / | 330 bits | No | Read/Write |
| Available 13.56MHz Chip | ||||
| NTAG 213 | ISO14443A | 180 byte | No | Read/Write |
| NTAG 215 | ISO14443A | 540 byte | No | Read/Write |
| NTAG 216 | ISO14443A | 924 byte | No | Read/Write |
| MIFARE Classic 1K | ISO14443A | 1 KB | No | Read/Write |
| MIFARE Classic 4K | ISO14443A | 4 KB | No | Read/Write |
| MIFARE Plus S 1K | ISO14443A | 2 KB/4 KB | No | Read/Write |
| MIFARE Ultralight EV1 | ISO14443A | 48 byte | No | Read/Write |
| MIFARE Ultralight C | ISO14443A | 144 byte | No | Read/Write |
| ICODE SLIX | ISO15693 | 896 bit | Yes | Read/Write |
| Available 860-960MHz Chip | ||||
| Alien H3 | ISO18000-6C | 512 bit | Yes | Read/Write |
| Other chips are also available. | ||||
| NTAG are registered trademarks of NXP B.V. and are used under license.ICODE are registered trademarks of NXP B.V. and are used under license.MIFARE and MIFARE Classic are trademarks of NXP B.V.MIFARE and MIFARE Ultralight are registered trademarks of NXP B.V. and are used under license.MIFARE and MIFARE Plus have registered trademarks of NXP B.V. and are used under license. | ||||
Product Details
Common Package
Note:
Volume
1000 pcs /2000 pcs /5000 pcs in one roll,
10,000 pcs /50,000 pcs /100,000pcs per carton
Weight
About 2KG for 1000 pcs
Carton Size
49*23*20 cm
49*23*26 cm
Special demands for packing available.
Applications
Available Applications:
virtually on any surface, metal, plastic, wood, paper, used for animal tracking, library management, mobile phone payment, anti-fake wine management, etc.
Powered by Asiarfid